| Service Type |
|
Price |
Turnaround Time |
| Basic Snowboard Service |
|
£30.00 |
2 days |
| Full Snowboard Service |
|
£38.00 |
2 days |
| Hot wax |
|
|
£10.00 |
While you wait |
| Delamination repairs |
|
£------- |
Upon inspection |
| Base Patches |
|
£------- |
Upon inspection |
Basic Snowboard Service £30.00
Full Snowboard Service £38.00 - (As below but inc - Gouge repairs to Board base)
Base Sand The base of the Snowboard is run through our Winterstiger machine to remove any 'clicks' in the base from stone pick up etc, this gives us a true platform for a perfect running surface.
Base Preparation Base is cleaned using special coat cleaner; the base is then lightly roughened using ski pads to improve wax absorption.
Ceramic Edge Polish Using our Winterstiger Edge Polisher the side edge of the Board is sharpened then polished in one motion.
Hot Wax Board is now run through our Hot Waxing machine to provide an even coat and deep penetration of wax, this is done 2 to 3 times to allow the pores in the base of the Board to open up for full wax absorption. Currently the best type of wax we are using for boarders is Dakline wax.
Rotor Brush Board is now ready for the wax to be brush out to leave the running surface of the board smooth with no wax inconsistencies, this is done several times for optimised finish.
Flow Finish Liquid base finish to improve glide properties and make the wax last longer, this is also applied on the edges as well.
